Advertisement

Keeping Your Family Safe In The Pool And Around Water

I became saddened over the last couple of weeks as I have seen more and more news stories about children and adults dying in swimming-related deaths, many of which were due to negligence on the part of parents and supervising adults. Every summer, water and pool deaths rise dramatically. If you needed approval to build a pool, you will need approval to demolish it, and you also need a pool removal Perth service.

Swimming is the number one summer recreation activity and with that comes the need for increased personal safety and the empowerment of children and adults. Unfortunately, most people are ignorant of how hard it is to actually protect another person from a dangerous situation because they have no formal training. As a certified bodyguard and family protection specialist, I feel every parent or guardian needs to know a few simple facts to keep their children and family safe.

The Three Step Rule

On flat even ground, with good footing, it is virtually impossible to keep someone out of harm’s way if you are more than three steps away, whether that is accidentally stepping into traffic or being grabbed by a would-be attacker. In the world of protection we call this “the three step rule.”

In the water you do not even get three steps because water is just too hard to move in and has too many variables. In the water if you are beyond arms reach of your child and they have a problem, you are potentially facing disaster. I know this may seem almost unfathomable, but if you understand the science of personal and family safety you would look at your family’s protection dramatically differently.

The following are the main areas that every parent and child should take into consideration to keep your family safe when being around a swimming pool or other body of water.

Know What To Do In An Emergency Around Water

If a child is missing, check the water first. Every second counts in preventing death or disability.

Know how and when to call 9-1-1 or the local emergency number.

If you own a home pool or hot tub, have appropriate equipment, such as reaching or throwing equipment, a cell phone, life jackets and a first aid kit close by in a designated area.

Enroll in Red Cross home pool safety, water safety, first aid and CPR/AED courses to learn how to prevent and respond to emergencies.

Know the shortest route to the local hospital / medical facility.

Pool And Water Safety Tips For Parents And Adults

Actively supervise kids whenever they around the water-even if lifeguards are present. Do not just drop your kids off at the public pool or leave them at the beach. Designate a responsible adult to supervise. Never leave your child unattended.

Always stay within arm’s reach of young children and avoid distractions when supervising children around water.

Put your cell phone away. No phone call is worth your child’s life.

Every child is different, so enroll children in swimming lessons when you feel they are ready. Teach children how to tread water, float and stay by the shore.

Teach children to always ask permission to go near water.

Set time limits for swimming and playing in the water based on each child’s experience and ability.

Do not let anyone play around drains and suction fittings.

Do not allow young swimmers to have breath-holding contests.

Even if you do not plan on swimming, be cautious around natural bodies of water including ocean shorelines, rivers and lakes. Cold temperatures, currents and underwater hazards can make a fall into these bodies of water very dangerous.

Avoid using medication and alcohol when around pools or large bodies of water. Alcohol and medication impairs judgment, balance and coordination. Anything that affects swimming and diving skills should be avoided. Some medication can even effect your body’s ability to regulate its internal temperature.

When there are several adults present and children are swimming, rotate the responsibility of watching the children between the supervising adults. People can easily become distracted after even short lengths of time so switch off supervisors ever 20 minutes.

You can start introducing your baby to water when they are about 6 months old. Remember to always use waterproof diapers and change them frequently.

Whether you’re swimming in a backyard pool or in a lake, teach children to swim with an adult.

Older, more experienced swimmers should still swim with a partner every time. From the first time your kids swim, teach children to never go near or in water without an adult present.

Remember that swimming aids such as water wings or noodles are fun toys for kids, but they should never be used in place of a U.S. Coast Guard-approved personal flotation device.

Have young children or inexperienced swimmers wear U.S. Coast Guard-approved life jackets around water, but not without supervision.

When using inflatable or portable pools, remember to empty them immediately after use. Store them upside down and out of children’s reach.

Single drain and flat drain grates pose the greatest risk in pools. If you are installing a new pool or hot tub, install multiple drains. This minimizes the suction of any one drain, reducing risk of death or injury.

For existing pools make sure your protective measures include anti-entrapment drain covers and a safety vacuum release system to automatically release suction and shut down the pump should entrapment occur.

Regularly check to make sure drain covers are secure and have no cracks, and replace flat drain covers with dome-shaped ones. If a pool or hot tub has a broken, loose or missing drain cover, don’t use it.

Pool And Water Safety Tips For Children

Teach your child how to swim as early as possible. Children can vary greatly in the maturity level and desire to swim but make it mandatory for them to learn to swim early.

Ensure your children know to swim only in designated areas supervised by lifeguards.

Have children learn to perform CPR on children and adults, and update those skills regularly. This is a skill set that will benefit them for a lifetime.

Understand the basics of life-saving so that you can assist in a pool emergency.

Educate your children about the dangers of drain entanglement and entrapment and teach them to never play or swim near drains or suction outlets. Make sure kids swim only in areas designated for swimming.

Teach children that swimming in open water is not the same as swimming in a pool. They need to be aware of uneven surfaces, river currents, ocean undertow and changing weather.
Have a telephone close by when you or your family is using a pool or spa.

Make sure that your child knows that if a child is missing they need to look for him or her in the pool or spa first.

Share safety instructions with family, friends and neighbors.

Teach children that no one should ever swim alone.

Caution children against showing off and playing rough and explain the dangers of running and diving recklessly.

Train your child to never push others into the pool.

Ensure your child understands that when using water slides, always go feet first.

Before diving or sliding, check to be sure that other swimmers are out of the way.

Make sure children keep rescue devices and first aid supplies near the pool and know how to use them.

Teach children what to do in case of emergency. Training like “know go” and “yell tell” is a good place to start. An alarm bell that could summon help would also be a good idea.

Pool Equipment, Toys, And Surrounding Area Safety

Use non-slip materials on the pool deck, diving board and ladders.

Install and use a lockable safety cover on your spa.

Safety covers and pool alarms should be added as additional layers of protection to your pool.

Remove any structures that provide access to the pool, such as outdoor furniture, climbable trees, decorative walls and playground equipment.

Keep toys that are not in use away from the pool and out of sight. Toys can attract young children to the pool.

Electrical equipment should be installed by a licensed electrician in accordance with local safety codes.

Check with a professional pool contractor to be sure the depth is sufficient for a diving board or slide. Always put a slide in a deep area of the pool – never in shallow water.

There should be a fence at least six feet high around all sides of the pool with a locked gate to keep children out when there is no supervision and the fence should be constructed so it is difficult to climb. Lawn furniture, trees and shrubs should not be close enough to provide an easy boost over the fence. Locks and latches should not be easy for a child to open.

If your house serves as a fourth side of a fence around a pool, install door alarms and always use them. For additional protection, install window guards on windows facing pools or spas.
Install pool and gate alarms to alert you when children go near the water. Avoid using a side of the house as part of the fence; toddlers have wandered out through an open patio door or window and drowned.

Mark water depths conspicuously. Use a safety float line where the bottom slope deepens.

Above-ground pools: Install sturdy guard rails around the pool deck. Look for rolled rims on the metal shell to be sure the rims do not present a sharp cutting edge if someone falls. The access ladder to the deck should be sturdy and without protruding bolts or other sharp edges. The access ladder should swing up to prevent children from unauthorized entry or should be easily removable for secure storage away from the pool area.

Keep electrical appliances such as radios out of the pool area because of the hazard of electrical shock.

Install a door alarm, a window alarm or both to alert you if a child wanders into the pool area unsupervised.

Unfortunate Statistics

Drowning is the leading cause of unintentional injury death among children aged 1-4 years.

Drowning is the second leading cause of unintentional injury death among children 5-9 years.

More than 60% of fatal drownings of 0-4 year-olds occur in swimming pools.

The National Child Safety Council reports that 600 children and adults drown annually in swimming pools, 330 in home pools.

Do not let your child or any member of you family become an unfortunate statistic. Take water safety seriously and maintain due diligence and focus around any body of water.

Brett Lechtenberg is Utah’s foremost expert on personal and family safety. Brett has dedicated his life to educating people about family safety and personal security. Through his comprehensive lecture series, motivational speaking and personal protection courses, Brett has trained thousands of everyday people to empower themselves both physically and mentally, as they learn the safest and most effective methods of personal protection. Learn more at Brett’s websites http://www.brettlechtenberg.com and http://www.antibullyprogram.com.

Article Source: http://EzineArticles.com/expert/Brett_Lechtenberg/1592400

Article Source: http://EzineArticles.com/9117732

How A Pool Contractor Can Save Your Life In Pool Removals

Having your own swimming pool in your backyard is such as breath of fresh air. Forget the expensive summer holidays in resort hotels or exotic locations abroad. With your own swimming pool, you and the family can have refreshing, fun times without the added costs and without leaving the house. Demolition of ground pools requires pool removal Sydney experts to make it happen.

Except, lately, you’re finding the lifestyle-enhancing feature too expensive to maintain. Now that the kids are all grown and living on their own, the swimming pool rarely gets used and becoming filthy. And you can’t exactly just leave it the way it is because it might be a hazard, especially when you have visitors with kids. When you decide to have it removed, it does not take overnight to fulfill this task.

Removing a pool in your backyard does not come easy. It entails time, skills and hard work. All kinds of questions may pass your mind when the removal process begins. It may cause inconvenience not only to your family but to your neighbors too if you plan to do it on your own or with the help of some of your colleagues. When it comes to hiring a swimming pool removal company, hire a company that has removed a lot of pools effectively – as simple as that. Practice really does make perfect. Plus, there’s a reason why a particular contractor has done a lot of work. People trust them – they have a good track record. How much experience should your pool demolition contractor have? One hundred pools or more certainly would be a high benchmark. If a company has removed that many swimming pools, they understand all the pitfalls and problems that can arise. That makes it much more likely your job will get done right and in a timely manner. Going with the right contractor could mean the difference between getting it done cleanly and simply in just a few days versus it taking weeks and potential legal hassles. Always aim for a company that keeps the work simple.

Your pool contractor should also follow prevailing safety guidelines for removing the water feature. Make sure your pool removal expert will apply for the necessary permits. Whether you intend to get rid of the entire above ground pool or simply want the in ground pool partially removed, proper permits guarantee that the job will be carried out according to the rules.

When the process is done, always think of the reason why you want to have the pool removed. Make it clear that you want to do this because of a valid reason. What do you intend to do with the space where your swimming pool once stood? Before you go with a complete pool removal or do a pool fill in, you need to decide what you will do with the space once the job is done. Do you want to build a granny flat over it so you can get another source of income when you rent it out? When you know what you want to do with the site after the removal, you will know the best type of pool removal to get. Some removals may even allow for pool conversion, turning pools into water tanks.

To find out more about how to get in touch with a reliable pool removal contractor, check out Martelletti Contracting

Article Source: http://EzineArticles.com/expert/Dan_J_Gustaf/1799269

Article Source: http://EzineArticles.com/9155134

How To Clean Your Swimming Pool

Pool Cleaning Procedures

There are a few basic procedures that are efficient and save time which any one can follow. Determining the surface composition before starting the cleanup procedure. We help address residential and commercial pool removal Brisbane.

Deck and Cover Cleaning

Remove as much debris as possible from the pool or spa deck and cover before removing it. A quick sweep or hosing can remove the debris near the pool. If the cover is a floating type without a roller system, be sure to fold or place it on a clean surface. Otherwise, when you put it back in place it will drag leaves, grass, or dirt into the pool. If it is a mechanized cover system, any small amount of standing water on top of the cover will slide off as you roll it up. If there is greater amount of water motor will be laboring, so you will need to use the water removal pump. Also be careful to avoid abrasive or sharp surfaces as you drag the cover off of the pool.

Surface Skimming

Dirt floating on the surface of the water is easier to remove than to remove it from the bottom. Remove floating debris off the surface, using a leaf rake and telepole. As the net fills, empty it into a trash can or plastic garbage bag. Do not empty your skimming debris into the garden or on the lawn for the debris is likely to blow right back into the pool as soon as it dries out.

There is no particular method to skim, but as you do, scrape the tile line, which acts as a magnet for small bits of leaves and dirt. The rubber-plastic edge gasket on the professional leaf rake will prevent scratching the tile.

If there is scum or general dirt on the water surface, squirt a quick shot of tile soap over the length of the pool. The soap will spread the scum toward the edges of the pool, making it more concentrated and easier to skim off.

Tiles

Always do the tiles first. Dirt falls from the tiles as they are being cleaned and settles to the bottom of the pool. If you need to remove stubborn stains with a pumice stone, the pumice itself breaks down as you scrub, depositing debris on the bottom.

Use the tile soap and tile brush to clean the tiles. Apply a squirt of tile soap directly to the brush and start scrubbing. To remove stubborn stains and oils, mix one part muriatic acid to five parts of soap. When cleaning tile, scrub below the waterline as well as above. Evaporation and refilling can change the water line. Never use really abrasive brushes or scouring pads to clean tiles they may cause scratches.

Water Level

If you add an inch or so of water to the pool each time you service it, you will probably keep up with normal evaporation. If you wait a few weeks until the level is several inches low, it will take hours to fill. Never leave the water on to fill by itself for it may take longer and most likely you may forget to turn it off.

After rains you might need to lower the pool level. In this case, use your submersible pump and a backwash hose or spare vacuum hose for the discharge. Alternatively, you can run the pool circulation system and turn the valves to waste. If you use this method, remember to return the valves to normal circulation.

Equipment Check

Checking your equipment and maintaining your support system is best way to solve the small corrective problems.

Start by circulation system by following the path of the water. Clean out the pool’s skimmer basket and Emptying the contents of the skimmer basket into your trash can or garbage bag.

Next, open the pump strainer basket and clean it. Check the pressure of the filter. There is no point in checking it before cleaning out the skimmer and strainer baskets, because if they are full the filter pressure will be low and will come back up after cleaning the baskets. If the pressure is high, the filter might need cleaning.

Now check the heater for leaves or debris. Turn the heater on and off a few times to make sure it is operating properly. While the heater is running, turn the pump off. The heater should shut off by itself when the pressure from the pump drops. This is an important safety check.

Now check the time clock for the time of the day; setting for the daily filter runs; setting for the cleaner’s clock. Always check the clocks because trippers come loose and power fluctuations or some service work on household items unrelated to the pool can also affect the clocks. Also, electromechanical time clocks are not exactly precision instruments. One might run slightly faster than another, so over a few weeks one might show a difference of an hour or more, upsetting your planned timing schedule.

After the equipment check, look for leaks or other early signs of equipment failure. Clean up the equipment area by removing leaves from around the motor vents and heater to prevent fires, and clear deck drains of debris that could prevent water from draining away from the equipment during rain.

Vacuuming

If the pool is not dirty, simply brush the walls and bottom, skipping the vacuuming completely. If the pool or spa is dirty, however, you have two ways to clean it: vacuuming to the filter or vacuuming with the leafmaster.

Vacuum to filter

Dirt collected from the pool or spa is sent to the filter of the circulation system. This is Vacuuming to filter.

Run the circulation system correctly and that all suction is concentrated at the skimmer port. Use your skimmer diverter for this process if dealing with a single port skimmer. If the system includes valves for diversion of suction between the main drain and the skimmer, close the main drain valve completely and turn the open skimmer valve completely. If there are two skimmers in the pool, close off one by covering the skimmer suction port with a tennis ball, thereby increasing the suction in the other one. On large pools, you might have to vacuum each half separately.

Attach your vacuum head to the telepole and attach the vacuum hose to the vacuum head. Slowly feed the hose straight down into the pool; water will fill the hose and displace the air. When you have fed all the hose into the pool, there is water at the other end.

To avoid draining the water from the hose keep it at water level, slide the hose through the skimmer opening and into the skimmer. Attach the hose to the diverter (with two-port skimmers, insert the hose cuff into the skimmer’s suction port). The hose and vacuum head now have suction. The suction port might be in the side of the pool below the skimmer in older pools. In this case you might need to put tennis ball over the skimmer suction port to increase the suction at the wall port. Make sure the hose does not contain a significant amount of air for if air reaches the pump, you will lose prime. If this occurs, remove the vacuum hose, re-prime the pump, and then try again.

To vacuum a pool or spa, work your way around the bottom and sides of the pool. If the pool is dirty, vacuum slowly to pick all the dirt, for moving the vacuum head too quickly, will stir up the dirt rather than suck it into the vacuum. If the suction is strong it sucks the vacuum head to the pool surfaces, then you need to adjust the skimmer diverter or valves to reduce the flow. You might also need to lower the wheels on the vacuum head, raising the vacuum head itself. If the suction is weak, you might want to lower the vacuum head or you might need to move the head more slowly around the pool to vacuum it thoroughly.

If the pool is very dirty, strainer basket or filter may be filled. When suction becomes weak, stop vacuuming and empty the strainer basket or clean the filter.

If the pool contains both fine dirt and leaves, the leaves will clog the strainer basket. You can use a leaf canister, which is an inline strainer that collects the leaves and allows fine dirt to pass on to the filter.

If the spa operates on the same circulation system, as the swimming pool, simply lift the vacuum out of the pool and immediately place it into the spa. Do this quickly because while the vacuum is out of the water, air enters the hose, causing it temporarily to lose suction. There should be enough water in the line for it to re-prime itself.

When you are finished, remove the vacuum head from the water. The suction will rapidly pull the water from the hose so it is advisable to pull the vacuum head from the pool and the suction end of the hose from the skimmer simultaneously, remove the hose from the water, and drain it on the deck.

After removing the equipment from the pool, check the pump strainer basket and filter for any debris. Clean if needed. Replace the skimmer basket.

Vacuum to leaf master

Leaf master is used instead of the vacuum if the pool is littered with leaves or heavy debris, then allowing the fine dirt to settle and vacuuming to the filter.

A garden hose is attached to a water supply and then to the leaf master. Clip the leaf master onto the telepole.

Place the leaf master in the pool. Turn on the water supply and vacuum, covering the pool floor and walls. Because the leaf master is large, you can move it quickly and vacuum the pool, taking care not to stir up the debris either by the non-floating type of hose or by moving the leaf master too fast. Emptying the bag periodically may be needed if there is too much of dirt in the pool.

Lift and remove the leaf master slowly by turning it slightly to one side from the water to the surface for pulling it straight up will force the debris back into the pool. Do not turn the water supply off before removing the leaf master from the pool, the loss of vacuum action can dump the collected debris back into the pool. When the leaf master is on the deck, turn off the water supply and clean out the collection bag.

Brushing

Brushing removes algae from surfaces of pools or spas. If they are not very dirty, you can skip vacuuming but brush the walls and bottom of the pool, starting from the shallow to the deep end. Directing the dirt toward the main drain so it is sucked to the filter.

SPA AND WATER FEATURE CLEANING

The steps outlined for pool cleaning will work just as well for spas and water features. Here are a few special tips about what you might encounter that is unique to these bodies of water.

Many spas are made of fiberglass, so take care when vacuuming to avoid scratching the surfaces.

Vacuum the corners of water features and small spas with the spa vacuum described earlier.

Evaluate the spa or water feature when you arrive, before you invest a great deal of time in cleaning. Test the chemistry first, so you can determine if you are better advised to drain the unit rather than clean and treat it. If the water or surfaces are very dirty, if the water is extremely hard or cloudy, if the dirt is in among rocks and gravel where it might be very hard to reach, pump out the water and clean the unit that way.

If you do drain a spa or water feature, be sure the equipment is turned off at the breaker so the time clock won’t turn it on before you are ready. You might need to set up your submersible pump and go to another job while the unit is draining. Your submersible has a small hole in the bottom to re-circulate the last inch of water to avoid burning out its seal, so you can let it run without worrying that it will run dry.

Before you clean the spa or water feature, clean the filter and run some fresh water (from the garden hose) through the circulation system to purge any dirty water from the lines. Nothing is worse than draining, cleaning, and refilling a spa only to turn the circulation back on and watch dirty water contaminate your work.

Be extra careful with chemical testing and application. Most spas and water features contain a tiny fraction of the volume of water in a pool, so they can’t absorb a mistake the way a pool might. It is better to add chemicals more slowly and in less quantity than you think necessary. You can always add more, but it is a real problem to remove any excess.

Water Testing and Application

Follow the general testing guidelines needed, testing for chlorine residual, pH, total alkalinity, and acid (or base) demand, calcium hardness or total hardness and total dissolved solids should be conducted one a month.

Apply the chemicals as described in Water Chemistry. Be careful with chemical bottles on pool decks for they may leave stains.

For more information on pool cleaning and maintenance please visit us at [http://www.poolhelpusa.com]

Article Source: http://EzineArticles.com/expert/Paul_James_Seabourne/1462410

Article Source: http://EzineArticles.com/7435566